Our products

  • Home
  • Our products
  • HeatPlus Heating Film
  • All Coated Film

All Coated Film

What is the heating film?

  • A heating film is a high-tech far-infrared plane-shaped heat radiator that is coated in a layer of film covering a thin layer of copper on top of carbon heat emitting element on a thin base film.
  • Unlike conventional heaters, the entire area of the film emits heat evenly. Also, the far-infrared radiation will make you feel the warmth of sunlight.
  • Normally, a film of 3.3m2 will consume 600W. Therefore, you can install in accordance with the wattage per 3.3m2 within the range of the electricity provision contract.
  • Also, heating films are made of PET and with special waterproofing treatment to prevent contact with the air. Therefore, our heating films can be used almost indefinitely, making these products the floor heating film for the next generation.

The far-infrared heating film, Heat Plus?

  • Our Heat Plus heating film can be printed with precision using our state-of-the-art equipment in order to reduce the unevenness of the temperature to a minimum. The product forms a silver electrode on the copper layer and carbon heat element.  The product is produced using the laminating method, which prevents sparks. Our products meet the world’s safety standards, making it the best heating film in South Korea and a very safe product.

HEATPLUS

All Coated Film

With the special insulation technology using adhesives, the product is protected from contact with air and moisture, making it highly reliable and resistant to moisture.

  • Silver electrodes are formed after carbon printing so that sparks and defects of the products are prevented, giving the product the advantage of a safe structure.
  • The PET base film is coated with carbon, which is the heating element. Then, on both sides of the film, silver and copper coating is applied to form the electrodes. This is followed by the application of the PET film, which is the material to realize insulation, flame resistance, and water-proofing. This PET film is also reinforced by the fabric material of high strength and elasticity, and this multi-layer structure provides our plane-shaped heating element high strength and good resistance against heat.

Heat Plus

The characteristics of our All Coated Films

Heat Plus, the product of the most advanced technology

Our Heat Plus All Coated Film is produced by coating PET film with carbon to generate heat. The process requires high-precision coating to the level of 10 microns.
After 72 hours of heat treatment at 70 ℃, our highly-advanced heating film can be used nearly indefinitely until you cut it up with scissors.

Heat Plus, a heating film that lasts almost forever

Our Heat Plus heating film is of a specially engineered structure that is composed of two external layers of PET films and the reinforcing lamination material in the middle. With special water-proofing treatment, this futuristic product can be used almost indefinitely and installed on your ceiling or floor for heating purposes.

Heat Plus in the world market

Heat Plus is being exported to many countries due to its superb performance and quality.
Especially, we are the first-ever and the only South Korean All Coated Filmmaker to export to Japan, where the expectation of quality is very high.

Ours is the best heating film in South Korea, with world-class insulation and flame-resistance performances to make the product safe.

With the high precision printing technology that can imprint high purity level carbon particles of nano-size, our products are being produced in a highly advanced production line where there are almost no temperature differences.
When we produce our heating film with the state-of-the-art laminating process, the copper and carbon heating elements form silver electrodes to prevent sparks.

* Our products are exported to Japan, China, the USA, Canada, Australia, Russia, Germany, Ukraine, Uzbekistan, Kazakhstan, Belarus, Hong Kong, Mongolia, and more.

Heat Plus

The structural diagram of a All Coated Film

Heat Plus

The specification and dimensions of All Coated Films

테이블제목
Model name Width Thickness Packaging unit Weight Wattage Max. Temp.
HP-ACN-410 1000 0.45 75m 47.4kg 220W/㎡ 100°C
HP-ACN-408 800 0.45 75m 40.8kg 180W/m 100°C
HP-ACN-405 500 0.45 100m 33.5kg 110W/m 100°C